M1098 - 13" X 40" Gearhead Lathe
This Gear Head Lathe has all the features, capacity and accuracy for turning high precision projects. The precision-ground induction-hardened ways, oil-bath headstock, cast iron construction and flame-hardened headstock gears ensure long, dependable service.
Spindle motor: 2 HP, 6.5A, 220V, 3-phase, 1720 RPM
Bed width: 7.3"
Swing over bed: 13"
Swing over gap: 18.3"
Swing over saddle: 7.8"
Distance between centers: 40"
Height of center line: 6.5"
Compound slide travel: 3.2"
Cross slide travel: 6.3"
Tailstock barrel travel: 3"
Leadscrew diameter: 22 mm
Feed rod diameter: 19 mm
Cutting tool maximum size: 5/8" x 5/8"
Spindle nose: D1-4 camlock
Spindle bore: 1.5"
Spindle taper: MT#5
Tailstock diameter: 32 mm
Tailstock taper: MT#3
Spindle speeds: 70-2,000 RPM
Feed rate range: 0.14-0.376 mm/r
Thread range (inch): 4-56 tpi
Thread range (metric): 0.4-7 mm
Longitudinal feed: 0.052-1.392 mm/r
Cross feed: 0.014-0.376 mm/rv Steady rest/follow rest
Chip pan
Splash guard
Stand
4-Way turret tool post
Halogen work light
Chuck tools
Oiler
4-Jaw chuck w/ int. & ext. jaws
10" faceplate
Center sleeve MT5 - MT3
Moris taper sleeve MT5 - MT3
Dead centers MT3
40-tooth change gear
Overall length: 74"
Overall depth: 28.5"
Height: 52.5"
Footprint: 70.5" x 15.5"
Approx. shipping weight: 1,433 lbs.

(Please note: We can also supply parts for Shop Fox machines. Contact us by email or call 1-803-791-3823 for pricing.)

Woodworking Machinery - Important Information:

- Unfortunately, no machinery shipments outside continental USA.
- Please allow additional time for shipping machinery.
- Pricing valid for internet, phone, and mail order only. We recommend calling us 1-803-791-3823 to place an order for machinery. This allows us to confirm all details of the order.
- Not valid for in-store pickup.
- South Carolina shipments require sales tax unless a tax exempt form is on file.
- Returns subject to prior approval. (Shipping charges cannot be refunded.)
- Shipping is based on commercial (business) delivery addresses.
- Additional charges for home delivery or lift gate services may apply. Often you can pickup freight at the shipping depot to save on these charges. Please contact us for details.
- When "checking out" online select $0.00 shipping charge
- Shipments are subject to inventory on hand.
- We stand behind the products we sell. We are not just a discount supplier of machinery.
- We also stock and teach classes in our fully equipped woodworking classroom.
- We are woodworkers so we can help you select the product that best fits your needs.
- Please feel free to contact us to discuss your requirements.